Products Accessories

Accessories

Please Contact Us to purchase an accessory, or fill out this form.

Slide Hammer for GroPoint Profile

Allows easy installation of GroPoint Profile without requiring excavation. Attaches to a pilot rod to bore a hole in the ground.

Part Number: 2826

Pilot Rod for GroPoint Profile

Attaches to slide hammer, makes a hole the exact size of the GroPoint Profile probe being installed.

For 2-Segment, 8-Segment, and custom lengths, please contact us for a Quote.

Part Number: 2554-PR

M12 Male to Female Cable

2 Meter Cable with 1 male and 1female connector. Connectors are 5 Pin M12 waterproof rated.

Part Number: 3066 2 meter: 3066-2

Li-SOCi2 C-Cell Battery

5.8 Ah -3.6 V Primary lithium-thionyl chloride (Li-SOCl2), high power, C-size spiral cell. Discharge temperature range: -55C to +85C. Up to 2000 mA pulse current. Low self-discharge.

Part Number: 6230

GPS Antenna

Allows GOES.Link Radius to obtain GPS location and time information necessary for data transmission.

Part Number: 3333

Spool of black electrical wire wound around a cardboard reel.

Additional Cable For GroPoint Sensors

Extend the standard 5m cable of your GroPoint sensor. Choose the additional length to add to the standard 5m length.

Weight: 38 g/m | 0.026 lb/ft

Part Number: 1207

4 Port Expansion Bar

Connects to an open channel of a GroPoint data logger and provides connectors for up to four more sensors. Adds 4 additional ports (you lose 1, you gain 5). Comes with M12 Cable.

Part Number: 2998-4

Alligator Clip to M12 Male Adaptor

Lets you use your GP-DU SDI-12 Sensor Reader with non-GroPoint SDI-12 sensors.

Part Number: 3080

A black outdoor antenna extension with a rectangular black amplifier box connected by a cable, and a coiled black cable attached.

2-Port Expansion Bar

3 port M12 waterproof connector with 2 female and one male M12 connectors. Connects to GroPoint dataloggers through cable. Used to expand SDI-12 connections or divide cables to extend cables in different directions.

Part Number: 2998-2

Please Contact Us to purchase an accessory, or fill out this form.

Flying Lead Adapter Cable for GroPoint Sensors (30 cm)

M12 5-Pin Female Connector to Stripped and Tinned

Part Number: 6305

Field-installable M12 5-pin male connector.

Connects flying-lead/third party SDI-12 sensors or external power to the GP-BTDL logger.

Part Number: 3053-PG9

AA Battery

-

Part Number: - 5012